Contact Us
Attn: Roger
Tel: +86-510-80228229 / 83759637
Mob: +86-13585004869
Address: No.18-1, Zhanghong Road, Xizhang Industry Park, Wuxi, Jiangsu, China.
Home > Knowledge > Content
The necessary operating procedure for the multi-angle pipe welder
Feb 14, 2019

The multi-angle pipe welding machine is more suitable for the welding of various plastic pipes and fittings for new construction and reconstruction projects. Under normal circumstances, the operator needs to pass the professional technical training before the equipment can be operated, so as to ensure the final welding quality.


In the application process, only the multi-angle pipe welding machine that has been repaired, inspected and corrected can be used. When using, remember to wear heat-resistant gloves and correct eye protection equipment, pay attention to the surrounding conditions of the operation and avoid equipment damage. The power supply connected to the multi-angle pipe welder must meet one of the requirements of the equipment. After confirming that the cable and power supply meet the requirements of the equipment, the power can be officially used.


The pipe fittings can only be taken apart when the work is to be carried out. Before multi-angle welding, a special scraper is used to properly scrape the surface. The tail of the pipe needs to be cut at a right angle with a pipe cutter, and then fixed. Improper use will cause welding

Previous: The importance of periodic testing of the performance of hot melt welders

Next: The entire operation process of PE hot melt welding equipment